Reconditioning and protection against wear of the rubbing parts;
Restoration of the geometry of the parts;
Elimination of pits and scratches on the working surfaces;
Reconditioning and protection against wear of the rubbing parts; Restoration of the geometry of the parts; Elimination of pits and scratches on the working surfaces;
1.672.000 VNĐ ( $ 80.00 )
Gel-revitalizant for hydraulic
The compound is designed for protection against wear and restoring repair of hydraulic steering wheel boosters without disassembling. The gel forms a new cermet coating on friction surfaces. As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times longer. Applied for hydroequipment revitalization.
Advantages
- decreases loads on a steering wheel; - increases performance level of a pump; - improves the accuracy of hydraulic system operation after 50-100 km run; - reduces noise and vibration of a steering wheel booster pump; - protects parts from wear in case of low oil level; - eliminates pump howling.
Technical characteristics General characteristics of the cermet layer: Microhardness ?750 kg/mm2; high corrosion resistance; roughness Ra up to 0,06 mkm.
Recommendations of mechanics: Hydraulic steering wheel booster in 揤olga?car usually makes hissing. This noise can mar the pleasure while driving though the manufacturers concede the 揾issing?of a hydraulic steering wheel booster under loads at low speed and do not consider it as a defect. XADO revitalizant can rectify this damage!
Practical experience: Car: 1995 model Volkswagen-Passat. Driver抯 complains: tight steering wheel and noise while driving. Diagnosis: wear of the steering wheel booster ?the pump and sealings must be replaced. The driver didn抰 find a pump of the necessary model at the service station but he had to go on a business trip abroad very soon. Having advised with the mechanics the driver decided to replace the seal and apply XADO revitalizant and then change the pump at a service station abroad. Several months passed and the driver came to the mechanic again. The mechanic who usually maintained this car made a compliment to the foreign mechanics ?the steering wheel could be easily turned with a finger! The driver could hardly remember the problem. Then he said that as soon as he left the service station, the noise in the steering wheel became quiet and after a long trip it disappeared at all. Thanks to XADO the driver saved his money, time and nerves!
Application: Add the gel-revitalizant into the steering pump reservoir. Check the operating oil level. After adding the gel-revitalizant turn the steering wheel for 5-10 minutes. Revitalization is considered to be finished after 50 hours of mechanism operation (1500 km/930 miles run).
Dosage: Oil system volume, L
Tubes, pcs
Treatment scheme
1-2
1
Once
2-5
2
Once
5-8
3
Once
Note! The sure sign of revitalizing beginning is the improvement in steering gear operation (steering wheel force augmentation, operation accuracy, noise reduction) as early as the first kilometers of run. If after 100-200 km run mechanism operation improvement does not occur, the most probable cause is a mistaken diagnostics.
CTY Dịch Vụ Địa Ốc ĐỒNG BIÊN
Reconditioning and protection against wear of the rubbing parts; 
